NC Decoiler Straightener Feeder Height Automatic Process Press Stamping And Guiding Device

Press stamping and guiding device, NC feeder feeding height, automatic process

1. Determine the installation position of the NC feeder according to the feeding direction requirements.

2. Hang the punch positioning block of the NC feeder fixing plate on the workbench of the punching machine. Note that the center line of the fixing plate and the center line of the punching plate of the punching machine should be aligned.

Then tap the M14 thread on the punching table and lock the punching table with the hexagonal M14 screw fixing plate.

3. Loosen the nut with the serial number 1. Lift the NC feeder to align the fixed plate. After determining the height, the screw with the serial number 2 is screwed to the appropriate position. Finally, the hexagonal M14 screw and the M14 spring pad feeder are fixed on the punching table. Side of the plate.

4. During the installation process, if the horizontal position of the feeding height of the NC feeder is not consistent with the stamping height of the die, the NC feeder slide will have an adjustment of about 100 mm for adjustment.

At this time, the two M14 bolts on the slide plate can be loosened, and the bolts fixed on the mounting plate can be adjusted. At this time, the feeding height of the feeder can be adjusted, adjusted to a proper position, and the screws can be locked.

5. When installing the mold on the press, make sure that the side of the mold is perpendicular to the direction of the roller of the NC feeder. If there is a distance between the pallet and the lower die when punching the thin material, the guiding device must be installed.

In order not to bend the material as a principle, and the mold is fixed perpendicular to the roller, otherwise the material will be skewed, resulting in feed resistance, resulting in different lengths of the feed.

6. according to customer needs, install the electric control box and proximity switch in the appropriate part of the press, and check whether its operation is normal.



7. If there is anti-rust oil on the NC feeder, please be sure to remove it and add lubricant to the oil filling part.

8. Please refer to the electrical circuit diagram assembly for the power supply line of this unit.

9. Special attention: The NC feeder must be grounded to avoid electric shock events and circuits to prevent interference.


Specifications:

Straightening Performance:

Products:

RUIHUI founded in 2000, the technology of automation periphery is from Japan. RUIHUI has been learning Japan and Germany technology, and using high standards of principle in the parts selection, for assembly process and spare parts, adhere to the requirements in accordance with the original design standard, and into each manufacturing process. In 20 years has accumulated experience and excellent design ability of Japanese engineers guided ruihui highly responsible for Industry and ruihui strong executive team, created a batch of well-known auto parts manufacturers, allowing them to reach the high level in same industry，and investment less.

Customer case

Manufacturing industry; the United States Lear, Honda factory, Ford factory, GAC Group, Chongqing Changan, Wuhan Shenlong, BMW Brilliance, FAW Volkswagen, Beijing Hyundai.

And other household appliances manufacturers; such as GREE, Haier, Midea, Chigo Air conditioning.

hardware manufacturers; such as the United States Southco, are Zhongtai industrial manufacturers success cooperation case.

RUIHUI QUALITY is not the best in the world, and the price is not the cheapest. But we can provide excellent products to help you defeat your competitors.

Products: Feeder machine, Straightener machine, Uncoiler machine, Decoiler with Straightener, 3 in 1 NC Straightener Feeder, Coil handling system, Transfer system, Robot System, to meet the market needs of customers, improve work efficiency, reduce the burden of enterprise management personnel, maintenance of production safety and the customer staff made a significant contribution.

At present the company to further develop the market, at the end of 2017, the total investment reached 30 million USD, plant area of more than 20 thousand square meters, in order to meet the demand on the market and lay a solid foundation after.

Why choose us?

1^st,We have a high level of technical research and development team;

2^nd,We can provide the design and planning of the whole plant to realize the turnkey project;

3^rd, our philosophy: quality is the social responsibility;

4^th,our products have been recognized by the market, in the major automotive OEM, home appliance industry, hardware industry has been applied;

5^th,We have a highly effective after-sales service team and get customer approval.