
AS4687-2007 Anping Manufacturer CE Certificated Galvanized Temporary Fence Post
1. Specification
We are proud to launch our AS4687/2007 certified Economical priced panels.
Materials:
Galvanized wire
Concrete blocks
Clamps
Bracing
Width: 2400mm
Height: 2100mm
Mesh infill: 60mm wide x 150mm high
Wire thickness: 3.15mm horizontal x 3.15mm Vertical.
Wire spec: HDG 28microns + (200g/m2)
Pipe specifications: 32OD X 2MM THICK; FINISH: HDG 42microns +(400g/m2)
1) Pipe thickness: 2.mm thick
2) Pipe welds: all the four ends are squashed and welded all around; we use epoxy paint on
all our welds to safe guard against rust ,with a coat of gal paint to make it aesthetic
3) Our infill mesh that is attached to the frame has a 10-12mm long weld on each and every
vertical wire and a 10-12mm long weld on every second horizontal wire (ON BOTH SIDES)
We are also proud to launch our AS4687/2007 certified panels:2100mm (H) x 2400mm (L)
Specification | |
Panel Size: | 2400mm(L) x 2100mm(H) |
Frame: | 32mm O.D. |
Infill Mesh: | 4mm horizontal and vertical 150mm x 60mm spacing's |
Weight: | 24kgs |
Finish: | Hot Dipped Galvanised to Australian Standard - 42 Microns |
Welds: | Welds are hand painted with thick Zinc paint and then sprayed with silver paint |
2. Structure
Fence Panel Our top of the range panel is manufactured for its robustness in remote and extreme climates. These products withstand these environments and are best suited for the Resource and Hire industries . Our flagship panel specification:
The manufacturing process uses hand welding for optimum strength with an average of over 70 micron hot dipped galvanised finish. We use the highest quality material specification, incorporating:
|
Clamps All Temporary Fencing clamps are made from hot dipped galvanised steel ensure along life which make them the perfect way to secure the top of the fencing panels together. We can also provide tamper proof nuts for extra security if required. |
Stays Temporary fence stays are used to support the temporary fence in high wind situations or on long runs to ensure the fence once erected remains secure.Our specialist installation guys will access the site and install stays if required. Fence stays are hot dipped galvanised to Australian Standard - 42 Microns and are attached to the mesh panels by 2 clamps and weighted down by concrete filled plastic feet. |
FeetAll Temporary Fencing plastic bases (feet) are a high quality, heavy duty, long life product, which are much smarter in appearance than the original concrete or steel feet. Your temporary fence will look great and be safer with these highly visible orange coloured feet. Our feet are more durable, will last longer, are easier to handle, and are not prone to falling apart or chipping. We stock a range of feet as listed below: 1. Blow moulded concrete filled plastic feetThe plastic bases stack conveniently by interlocking into the foot below them for easy and safe transport. The blow moulded plastic feet are filled with concrete which make them extremely durable as the entire concrete base is encased in plastic. This will prolong the life of the foot which will save you money in the long run. 2. Injection Moulded concrete filled plastic feet These are the basic feet used by many of the temporary fencing companies in Australia. The concrete is poured in from the underside and the feet have two steel reinforcing rods. |
New Type:600*228*150mm Old Type:562*245*130mm |
3. Feature
High quality Temporary Fence Stays used to support the temporary fence in wind areas
Hot Dipped Galvanised Tube at 32mm O.D
Specially designed for extra strength so fence stands up in winds.
Each Stay requires 3 Clamps and 3 Plastic Feet which we can provice in a complete system.
4. Application
Construction sites
Secures site and equipment.
Insurance benefits.
Meets Occupational Health & Safety requirement.
Securing sites
Prevents unauthorised trespassing and liabilities.
Secure dangerous areas
Road closure application
Deters motorists from entering a road.
Crowd control barriers
Ideal for road closure & screening walkways
Wind Prone Areas
Unique panel design which combines the strength of the weldmesh and v-shaped galvanized steel frame
Quality Standards:
AS 2423-2002 Coated Steel Wire Fencing Products for Terrestrial, Aquatic and General Use.
AS 4687-2007 – Temporary Fencing and Hoarding
5. Detail Show
Trade Term:
Trade terms: FOB, CNF, CIF,
Payment terms: 30%T/T as deposit , L/C, Western Union,
MOQ: 50 sets
Port: TIANJIN
Sample time: 5-7days
Lead time: 15-20days depend on the final order quantity
Shipment: By sea or airport
Supply capability: 9000set/month
Sample availability: Yes
Top Fence Co.Ltd
Top Fence co focused on manufacturing premium temporary fencing kit at a cost efficient rate covered with temporary fencing panels HDPE foot as well clamp system ,temporary fencing bracket ,temporary fencing gates etc, Annual we manufactured at least 50000 piece temporary fencing sold well in australia market such as brisbane ,Melbourne ,Perth ,Fremental .The products we manufactured adopt to AS 4687-2007 Standard Required .For sake of saving laborforce cost we imported welding robots from germany to eliminate the procedure not necessary to operate by workers so enable us always can pass a competitive rate .We serve more than 200 client in Australia ,among of them there are 20 regular long term clients what we achieved is casue we build complete after sale service and quality control system,our inspectors are through yearly professional training who help us to win a good repuation in local Australia .Top Fence take customers accurate requirements of market as key point of mutual profit and business success.Adquate market investigation made us to reserach and develop the temporary fencing to meet any group client requirments such as Standard Temporary Fence Classfied 14 microns /42 microns zinc layer ,Economic Temporary Fence etc
Advantage
|
PLUS |
We owned all of productions equipment in one manufacturing shop ,we supply temporary fencing panels ,clamp ,foot by owned facility |
What we manufactured temporary fencing materials are fully meet AS4687-2007 standard which testing by more than 200 clients |
We have full range and a complete system of temporary fencing products to meet any requirements of Australia market |
We have achieved a excellent system which from purchase to sale always in high position of temp fencing market |
We created and enhance the system of after sale service and policies of replacement for client better purchase experience |
What is required Custom clearance papers In Australia for first time import temporary fencing ? |
Commercial Invoice ,Packing List ,Packing Declaration ISPM 15 ,TYPE 50 ,Free Trade Agreement Certificated ,all papers will emailed after departure |
What is you payment Term of order? |
We prefer TT 30% deposit balance 70% at sight of bill of lading copy ,actually you could paid balance before container arrival port of Australia |
What is MOQ ? |
Our MOQ is 250 kit included panels ,foot ,clamp because the Full container load imported are most saving way to purchase temporary fence ,less full container imported will be charge a high duty and local cost by Ship master in Australia and New Zealand |
If we arrange a trip to visit you factory would please pick us up ? |
Obviously Yes ,,the nearest international air port from us is SHIJIAZHUANG or BEIJING 3 hours trips we will arrange accommodation and amenity when you are in china |
Sample, Would you please send us a sample for testing quality |
Would you please send us a sample for testing quality Yes we can ,sample are free but please send us postage finally if you order us the parts of cost will be deduct from order |